Hi-Shrink tape, transparent (width 25.4 mm) roll/ 91.4 m

1" HI-SHRINK TAPE 220 20% Shrink 0.0018" thick Coated Heat Shrink Polyester Tape 180°C, clear, 1" wide x 100 YD roll

.002" Heat Shrink Polyester Tape

Hi-Shrink Tape is a tough, flexible, heat shrinkable polyester film.

When wrapped around an object and heated, Hi-Shrink Tape has the unique ability to shrink and apply pressure to the surface of composite parts. This simple method of pressure application is used to advantage in many industries. The 200 Series tapes are the most common product used in a wide variety of applications for composite tubing ranging from 1" diameter up to over 36" diameter. 220R specifically is our swiss army knife.

Product Description:

• .002” (0.050mm) thick Polyester film
• Available on 1.5” (38mm) ID or 3.0” (76mm ) ID cores
• Standard widths of 0.5” (12mm) wide up to 2.5” (63.5mm) wide

Product Benefits

• Good film for thin walled composite parts
• Applies low to moderate shrink force depending on shrink % that you specify
• Thin film minimizes height of ‘cello lines’ on cured part
• Commonly used for consolidating composite tubes, flexible ductwork and silicone hoses during cure
• Suitable for cure temperatures up to 330°F (165°C)

 Product Characteristics

• Available in non-coated, 1-side, or 2-side release coated versions
• Custom slit widths and roll lengths available upon request
• Available shrink percentage ranges from 5% up to 20% shrink, and is customized to your application based on amount of compaction force required

HI-SHRINK TAPE is a tough, flexible, heat shrinkable polyester tape. When wrapped around an object and heated, HI-SHRINK TAPE has the unique ability to shrink and apply pressure to the underlying composite part. This simple method of applying pressure is used to advantage in many industries.

The compression force characteristics of Hi-Shrink Tape make it an effective tool for compacting, debulking, and shaping composite parts. In addition, the tape is also commonly used to compress and consolidate high voltage coils during the manufacturing process.

Hi-Shrink Tape starts to shrink around 65°C and has been used in applications up to 180°C. If left unrestrained, Dunstone Hi-Shrink Tape will shrink 20% in length after 15 minutes at 150°C*.

Review Packaging Information

Product Weight: 0.70 lbs

Product Description: 1" width x 100 YD length roll